Will Art X15 Ultrafoot Work with Johnson Millennium?
The compatibility of an Art X15 Ultrafoot with a Johnson Millennium depends entirely on the specific models of both the pedal and the amp. There's no universal "yes" or "no" answer. Let's break down why and what you need to check:
Understanding the Connection:
The Art X15 Ultrafoot is a footswitch, designed to control various functions on amplifiers and effects processors. Johnson Millennium amps are known for their versatile features, but their footswitch compatibility varies significantly depending on the model and year of manufacture. The connection is usually made via a standard 1/4" (6.35mm) TRS (Tip-Ring-Sleeve) cable. However, the wiring within that cable and the amp's footswitch input needs to be correctly matched.
Factors Affecting Compatibility:
-
Johnson Millennium Model: Johnson produced many different Millennium amp models over the years, each with potentially different footswitching protocols. Some older models might only support basic on/off switching for channels, while newer or higher-end models could offer more extensive control over features like effects loops, reverb, or EQ. You must identify the exact model of your Johnson Millennium amp.
-
Art X15 Ultrafoot Configuration: The Art X15 Ultrafoot itself is configurable, and its functionality depends on how it's wired and programmed. While it generally uses a standard TRS connection, the internal wiring determines the signals it sends. It's crucial to understand the switching configuration of your Art X15 Ultrafoot (e.g., latching, momentary, etc.).
-
Footswitch Input on the Amplifier: The Johnson Millennium amp's footswitch input needs to be compatible with the signal sent by the Art X15 Ultrafoot. Some amps might only respond to specific types of switching signals, and an incompatibility could result in the footswitch not functioning correctly or even damaging the amplifier. Check your amp's manual carefully!
How to Determine Compatibility:
-
Consult your Manuals: This is the most important step! Thoroughly review the manuals for both your Art X15 Ultrafoot and your Johnson Millennium amplifier. They should detail the footswitching capabilities and connections for each device. Look for information on supported footswitch protocols (e.g., momentary, latching).
-
Check the Footswitch Input: Examine the footswitch input jack on your Johnson Millennium amp. A diagram might be printed near the jack indicating whether it supports a specific type of footswitch.
-
Experiment (Cautiously): Once you have a good understanding of the manuals, you can cautiously try connecting the Art X15 Ultrafoot. Start with the simplest functions (channel switching). If it doesn't work as expected, don't force it. Incorrect connections could damage equipment.
If you can't find information in the manuals:
Contacting Art or Johnson's customer support directly might be necessary to confirm compatibility. Provide them with the exact models of your amplifier and footswitch.
In short: While the Art X15 Ultrafoot could potentially work with a Johnson Millennium amp, confirming compatibility through careful examination of the manuals and potentially contacting customer support is crucial to avoid potential equipment damage. Always prioritize safety and careful verification before making any connections.
